Congratulations on the establishment of the official website of Guangdong wisdom Lighting Co., ltd.!
DYNAMIC Position:Home > NEWS > DYNAMIC

Maintenance rules of solar street lamps

Author:  Source:   Update:2017-11-11  Counting:197
Solar street lamp is by crystal silicon solar battery, intelligent charging and discharging controller to control the lights, right now, it's high stability, high efficiency and energy saving and environmental protection make it more and more popular in the city roads, parks, parking area, etc..

New rural solar street lamps in the maintenance need to pay attention to the following five rules
First, buy Lamps, do not install, should carefully watch the marker lamps and read the installation specifications, according to the instructions of the installation and use of designated lamps, otherwise there may be danger;
The source parameters of second, according to the signs provide the timely replacement of aging of the tube, the two ends of the lamp tube, found red or black shadow, jump lamp does not shine, the lamp should be replaced in a timely manner, prevent a ballast burned unsafe phenomenon; third, should pay attention not to change the structure of lamps in cleaning and maintenance, also don't change the lamp parts, in a clean maintenance after the end, as is the lamp should be installed, do not leak, misloading lamp parts; fourth, to strengthen the maintenance of lamps in use, can prolong the service life. The room lamp must often wipe with dry cloth, and pay attention to prevent moisture intrusion, in order to avoid a long time on corrosion damage or leakage short-circuit phenomenon; installed in the toilet and bathroom lights shall be fitted with a waterproof lampshade, otherwise it will greatly shorten the service life of the lamp should be installed in the kitchen; pay special attention to smoke, because grease will occur effect of light illumination; light transmittance of the lampshade is good, but easy to absorb dust, we must be diligent in cleaning, so as not to affect the degree of penetration of light; if the lamp is non metal, can use wet cloth to wipe, lest dirt accumulation, hinder the lighting effect; fifth, do not frequently switch in the use of lighting, the lamps in the frequent start the moment, the current through the filament current is greater than the normal working hours, the filament temperature increased sharply accelerated sublimation, which will greatly reduce its service life, so To minimize the switch of lamps and lanterns.
Special reminder
Wetting is easy to cause the lamp to rust, paint, and shorten the service life of lamps and lanterns. Therefore, moisture is the lighting maintenance hub, especially for headlamp and kitchen stove toilet, bathroom, must be installed to prevent moisture intrusion proof lamp, avoid corrosion damage or leakage short-circuit.
The lamp is best not to wash, as long as the dry cloth to wipe water, if accidentally encounter water to try to dry, should not turn on the lights immediately after use wet dishcloth to wipe.

Copyright © 2016 Guangdong wisdom Lighting Co., Ltd. :
Address: No. 23, No. 2, high tech East Road, Jianghai District, Jiangmen TEL:(86)750-3778601 FAX:(86)750-3778600 Website:www.
友情链接:    四柱八字测彩票-安全购彩   全民汇快三彩票---首页欢迎你   c89彩票登陆_开奖网   北京pk全天免费计划_全天北京pk拾计划   喜盈盈彩票